Energy efficiency rebates in Wisconsin.
Every federal, state, and utility incentive for heat pumps, insulation, air sealing, and weatherization in Wisconsin — cross-referenced and kept current.
Tell us about your project. We'll match you with local pros and every rebate you qualify for.
Focus on Energy
- Type
- Quasi State
- Website
- www.focusonenergy.com
- IRA allocation
- $149M
Active rebate programs
3 programs currently accepting applications in Wisconsin.
| Program | Amount | Eligibility | Status |
|---|---|---|---|
| Focus on Energy — Air-Source Heat Pump | $400–$900 | WI utility customers; $600–$900 income-qualified tier | Active |
| Focus on Energy — Geothermal Heat Pump | $750–$1,000 | WI utility customers ($1,000 with natural gas service) | Active |
| Focus on Energy — Insulation & Air Sealing | Up to $1,475 | WI utility customers; tiered by income (air sealing up to $1,475, attic up to $850, wall $575) | Active |
Run the numbers for Wisconsin.
Free, no account needed. Every figure is cited, so you have a benchmark before a Wisconsin contractor quotes you one.
IRA implementation status
How Wisconsin is implementing the Inflation Reduction Act home energy rebates.
Metro areas in Wisconsin
Local utility programs and municipal incentives by metro area.
We Energies territory
Madison Gas & Electric / Alliant
Rebates are step one
Once you know what Wisconsin pays, here's the rest of the path: what order to do the work in, and what belongs on a fair quote.
What order to do it in
Envelope first, equipment second — how to sequence a retrofit to your budget and your rebates' deadlines.
How to read a quote
What belongs on a heat pump or insulation quote, and the red flags that mean keep shopping.
What attic insulation costs
Per-square-foot prices by material, and why this is the work rebate programs subsidize hardest.
Claim rebates after install
The document kit, the application walkthrough, and the mistakes that get claims rejected.
Rebates cover part of it. Here's the rest.
What Wisconsin pays is the first rung. These cover the money questions underneath it: the 2026 federal rules, the state and utility loan programs worth checking before a bank, and the borrowing routes that come after.
How to pay for it
The whole money picture in order of cost: rebates first, then low-interest loans, then borrowing.
State energy loans
The state and utility loan programs we have verified at the administrator, with rates and conditions.
The 2026 rebate rules
What DOE Program Notices 26-1 and 26-2 changed about HEAR and HOMES, and which states are live.
Latest Wisconsin energy news
Recent Wisconsin rebate, policy, and efficiency coverage from our monitored sources.
Vent over roof over parallel cord roof trusses
This is a technical forum discussion, not news about a program or rebate, so there's nothing here that calls for homeowner action. A homeowner in Wisconsin planning a new house asked whether a particular cathedral-ceiling roof design would work for a highly insulated, energy-efficient home. The design used steeply sloped trusses packed with dense cellulose insulation, with a ventilated air gap built above the roof deck to let any trapped moisture escape, plus solar panels on the roof. Building science experts who responded raised some concerns. They noted that the vent channel material the homeowner planned to use would block moisture from drying out, and suggested a more vapor-permeable material instead. They also said cellulose insulation is very hard to blow into this kind of roof cavity from the ends only, especially across a long span, and that a different insulation product, often installed from inside before the drywall goes up, would likely work better. One expert pointed out that local building codes do not allow this type of permeable insulation to sit directly against the underside of the roof deck in this climate zone, so the plan as described would need to change to meet code. For most homeowners, the takeaway is simply that cathedral-ceiling and vaulted-roof insulation jobs are tricky to get right, and small choices about materials and ventilation can affect whether moisture problems develop over time.
Exterior insulation on a smaller home in Climate Zone 5
A homeowner in southeastern Wisconsin, early in planning a new one-story house, asked a building forum for feedback on wall design choices before construction starts. The question is a useful window into the kind of decisions that affect a new home's long-term energy bills, even though it's not tied to any program or deadline. The homeowner was weighing two approaches. One, suggested by a family member, is simple: standard wood framing with closed-cell spray foam insulation sprayed directly into the wall cavities. The other is more involved: adding a layer of mineral wool insulation board (brand name Comfortboard) on the outside of the wall sheathing, plus staggered stud framing and dense-pack cellulose insulation inside, with a "smart" vapor-control membrane (Intello) near the drywall. Wisconsin's winters there can hit minus 20 degrees Fahrenheit, with hot, humid summers reaching the mid-90s, so the wall needs to handle a wide swing in temperature and moisture. The homeowner wasn't sure whether the extra complexity of exterior insulation and staggered framing is worth it for a smaller house, or whether simpler spray foam framing would perform just as well. This is a decision many homeowners building new construction eventually face: how much upfront complexity in wall insulation makes sense for the size and climate of the house, since the choice affects comfort, moisture durability, and heating and cooling costs for decades to come.
Ready to see what you qualify for in Wisconsin?
Tell us about your project and we'll match you with up to 3 licensed local contractors. Every quote itemizes the Wisconsin incentives you qualify for. Free, no obligation.
Wisconsin: up to $7,000 back right now
Get quotes